Brother BAS-761 - Page 101

Programmer
100
Chapter 3 Programming with Command Function
4
Deleting 1
1. Press
2
, then press .
The needle point moves to the first stitch, point A and the first
stitch.
2. Press
C
.
3. Input the number of stitches to be deleted, then
press
.
The example is deleting 1 stitch. Press
1
.
4. The needle point moves to A.
5
Saving
1. Specify the program number on the operation
panel, then press
switch for writing into the
floppy disk.
Refer to "Using the operation panel of the main body"(page
131) for detailed operation.
6
Ending program
1. Press
P
.