Brother BAS-761 - Adding Sewing Point before the First Stitch

Programmer
45
Chapter 2 Programming with Help Function
Adding sewing point before the first stitch
A point is added before the current sewing point to
change the sewing start position.
The example in the left is used for explanation of
changing the sewing start position from 1 to 1'.
1
Calling data
1. Press
P
.
The work clamp comes down and the programmer screen is
displayed.
2. Select with , then press .
3. Select
with , then press .
4. Input the program number, then press
.
5. Press
ESCESC
.
2
Moving to position 1
1. Select with , then press .
2. Press
1
, then press .
The needle moves to the sewing start position.
3. Press
ESCESC
.