Brother BAS-761 - Moving the Entire Pattern in Parallel

Programmer
55
Chapter 2 Programming with Help Function
4
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with , then press .
2. Select
with , then press .
3. Input the program number, then press
.
4. Press
ESCESC
.
5
Ending program
1. Press
P
.
Moving the entire pattern in parallel
The entire program data is moved in parallel. The
example in the left is used for explanation of moving
the program data in parallel.
1
Calling data
1. Press
P
.
The work clamp comes down and the programmer screen is
displayed.
2. Select with , then press .
Standby position