Programmer
12
Chapter 1 Initial Setup
Contents
This manual consists of the following chapters.
Chapter 1 Preparations of operation
Describes the basic precautions.
Chapter 2 Programming with Help Function
Describes the procedure to create programs using icons.
It is recommended for persons
who are used to icon input.
who use this machine for the first time.
who sometimes create programs.
Chapter 3 Programming with Command Function
Describes the procedure to create programs using command functions.
It is recommended for persons
who is specially responsible for program creation.
who have created programs for BAS-760 series.
Chapter 4 Reading/Writing Data
Describes the procedure to read from/write into floppy disks.
Chapter 5 Practical programming examples
Two examples of frequently created programs are described.
To Next Page
Loading...
