Brother BAS-761 - Deleting the First Stitch

Chaprter 3 Programming with Command Function
Programmer
95
Deleting the first stitch
The first stitch of the programmed pattern is deleted. The
example in the left is used for explanation of deleting 1
and setting 2 for the sewing start position.
1
Calling data
1. Specify the program number on the operation
panel, then press
switch to read the data.
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position 1
1. Press
1
, then press .
The needle moves to the sewing start position.
3
Deleting 1
1. Press
C
.
2. Input the number of stitches to be deleted, then
press
.
The example is deleting 1 stitch ahead. Press
1
.
3. The needle point moves to 2.
4
Saving
1. Specify the program number on the operation
panel, then press
switch for writing into the
floppy disk.
Refer to "Using the operation panel of the main body"(page 131)
for detailed operation.