Brother BAS-761 - Deleting the Shunting Point

Programmer
53
Chapter 2 Programming with Help Function
5
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with , then press .
2. Select with , then press .
3. Input the program number, then press
.
4. Press
ESCESC
.
6
Ending program
1. Press
P
.
Deleting the shunting point
The shunting point is deleted. The example in the
left is used for explanation of deleting A.
1
Calling data
1. Press
P
.
The work clamp comes down and the programmer screen is
displayed.
2. Select with , then press .