Brother BAS-761 - Page 53

Programmer
52
Chapter 2 Programming with Help Function
3
Programming a new point
1. Select with , then press .
2. Move the needle with
. Press
when the needle point is at B.
B is programmed.
3. Press
ESCESC
.
4
Deleting 1
1. Select with , then press .
2. Press
1
, then press .
The needle moves to the sewing shunting point A.
3. Press
ESCESC
.
4. Select
with , then press .
5. Input the number of stitches to be deleted,
then press
.
The example is deleting 1 stitch. Press
1
.
6. The needle point moves to B.
7. Press
ESCESC
twice.