Brother BAS-761 - Description of Commands; Moving Needle Point; Deleting Data; Ending Programming

Programmer
81
Chaprter 3 Programming with Command Function
Description of commands
Moving needle point
Proceeding by stitches
Returning by stitches
9 9 9
Proceeding to the end point
9 9 9
Returning to the first point
R
Returning the position to the standby position.
Deleting data
R
2
2 2
Deleting all data.
C
Deleting data from stitches
C
Deleting data before stitches
Ending programming
E
1
1 1
Ending programming
Creating program
M
Changing stitch length when creating a double stitch, an offset, and
a curve. Input the stitch length in .
LILI
0
Creating a line. Input the stitch length in
0
.
M
0
Creating a curve. Input a stitch pitch in . Input
L
7
8 9
to complete the curve data.
M
2
Creating a double stitch in the reverse direction to the sewing
path. Input the width of double stitch in .
L
7
8 9
Ending input for a curve
9
M
Creating needle tacking data. Input the stitch length in .
F
Creating feed data.