Brother BAS-761 - Page 55

Programmer
54
Chapter 2 Programming with Help Function
3. Select with , then press .
4. Input the program number, then press
.
5. Press
ESCESC
.
2
Moving to position A
1. Select with , then press .
2. Press
1
, then press .
The needle moves to the shunting point.
3. Press
ESCESC
.
3
Deleting A
1. Select with , then press .
2. Input the number of stitches to be deleted,
then press
.
The example is deleting 1 stitch. Press
1
.
3. The needle point moves to 1.
4. Press
ESCESC
twice.
Standby position