Brother DCP-L5652DN Service Manual

5-6
Confidential
1.3.2 ADF performance test (function code: 08)
<Function>
This function is used to test the performance of the automatic document feeder (ADF). The
scanned pages of the documents fed by the ADF are counted and the result is displayed on
the LCD.
<Operating Procedure>
(1) Set the documents in the ADF unit.
"DOC. READY" is displayed on the LCD.
(2) Press the [0], and then the [8] key in the initial state of maintenance mode. "ADF CHECK
P.**" is displayed on the LCD, and the documents are ejected while the scanned pages
are counted. (** indicates the current count of the scanned pages.)
(For duplex scanning models, as two faces per sheet are scanned, the value increases
by two each time a sheet is ejected.)
(3) When the [X] key is pressed, the machine returns to the initial state of maintenance
mode.
Note:
• If no document is set in ADF when the function is executed, "NO DOCUMENT" is
displayed on the LCD and the machine returns to the ready state of maintenance mode.

Brother DCP-L5652DN Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Memory	256 MB
Processor	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Print Speed	42 ppm
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	250 sheets
Scanner Resolution	Up to 1200 x 1200 dpi
Connectivity	USB, Ethernet
Mobile Printing	Brother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner Yield	Standard: 3, 000 pages, High Yield: 8, 000 pages