V-20
31 GRID PRINT
A single color or two color (R,G,B) Grid Pattern and a full color Stripe Pattern can be
printed as Test Prints.
Procedure
Description of Procedures LCD Message
1)Press the Continue button.
(a)
→
(b)
2)Using the Set or
▼
button, select the desired
pattern (ex. grid pattern), and then press the
Continue button.
(b)
→
(c)
3)Using the Set or
▼
button, select the desired
color (ex. red color), and then, press the
Select button. (c)
→
(d)
4)After completion of the warming-up process,
the desired pattern of the selected color will
be continuously printed. (d)
5)Print operation is suspended by pressing the
Font button. (d)
→
(e)
If it is desired to return to the previous screen
(message), press the Font button one more
time. (e)
→
(d)
6)If it is desired to return to On-line mode,
press the On Line button. (f)
→
(g)
SERVICE MODE
TEST PRINT/NEXT
31 GRID PRINT
GRID PRINT/STRIPE
31 GRID PRINT
Y/M/C/K/R/G/B
31 GRID PRINT [YM]
U:[ ] L:[ ] [ ]
31 GRID PRINT
Y/M/C/K/R/G/B
01 WAIT [ ]
U:[ ] L:[ ] [ ]
a)
b)
c)
d)
e)
f)
R:YM
G:YC
B:MC
SERVICE MODE
TEST PRINT
g)
To Next Page
Loading...
