V-21
32 NEXT CARE INFORMATION
Information relating to the replacement timing of periodical replacement parts can be
obtained. This is the life for each of the components in images or pages.
Procedure
Description of Procedures LCD Message
1) Press the Continue button after selecting
Screen (a) “NEXT CARE INFO”.
(a) → (b)
2) Using the Set or ▼ button, select the care
code for which you need the information.
2: Fuser Cleaner (FC)
7: OPC Belt Cartridge (BL)
8: Fusing Unit (FU)
9: Replacement Kit 120K (120K)
(b)
3) After selecting the code, press the Continue
button. Then, the number of images or
printouts corresponding to the selected code
is displayed.
(b) → (c) through (f)
4) Screen (c) through (f) can be cleared by
pressing the Font button.
(f) → (e) → (d) → (c) → (b)
Press the Font button one more time at
screen (b) to return to the service mode.
(b) → (a)
SERVICE MODE
NEXT CARE INFO
32 NEXT CARE
No.=<1,2,3,4,5,6,7,8,9>
NEXT FC ROLL
012000P
NEXT BL UNIT
05000P
NEXT FU UNIT
a)
b)
c)
d)
e)
f)
040000P
NEXT 120K KIT
120000P
To Next Page
Loading...
