Brother HL-2400C - Page 233

VII-34
6) Remove the paper exit inner cover by removing the set screws BT3X8 (4 pcs.),
release arm, hook (R) & (L) and spring.
Fig.7-56
7) Press the sides of the fan case to release the fan motor assembly from the paper exit
guide unit.
8) Remove the fuser fan motor from the case.
Fig.7-57
Paper exit inner cover
Release arm
Fan case
Hook(L)
Fuser Fan Motor
Spring
Hook(R)
Paper exit
guide unit
Top Cover
(Paper Exit Cover)