Brother HL-2400C - Page 314

A-11
6. RE-PACKING INSTRUCTIONS
PRECAUTION
When re-packing the printer before shipping, be sure to follow the steps and
cautions below. Failure to do so will cause toner or oil spill in the printer and
severe damage to the printer.
6.1 Toner Cartridge
1) Open the front cover and remove all
the toner cartridges (K, Y, M, C) from
the printer.
2) Put the original protective cover
(orange) onto each cartridge and put it
into the polyethylene bag.
3)Put the toner cartridges into the original
starter kit packing.
CAUTION
• If you do not have the original protective cover, cover each toner cartridge with bubble
sheet to protect the developer roller.
• If you do not have the original starter kit packing, pack each toner cartridge firmly with
bubble sheet and put them into the outer carton.
6.2 OPC Belt Cartridge
1) Open the top cover and remove the
OPC belt cartridge from the printer.
2) Open the shutter on the OPC belt
cartridge and remove toner in the
cartridge with a vacuum cleaner.
3) Cover the OPC belt cartridge with the
original protective sheet (black).
4) Put the cartridge into the polyethylene
bag.
Protective
Cover
Starter Kit
Packing
Toner
Cartridge
Shutter
Protective
Sheet