Brother HL-2400C - Page 320

7. Hidden Function Menu
1. Hold down the Ù key and turn the printer ON
LINE TEST LCD TEST All LCD segments turned ON
SWITCH TEST Press switches to check operation on LCD
SENSOR TEST
RAM SIZE Shows installed RAM size
TRAY 1 SETTING Shows current Tray 1 size
TRAY 2 SETTING Shows current Tray 2 size if installed
PCMCIA 1 TEST Test PCMCIA card if installed (Flash card only, not ATA card)
PCMCIA 2 TEST Test PCMCIA card if installed (Flash card only, not ATA card)
MIO TEST Test MIO card if installed
exit to ONLINE
DRAM CHECK START DRAM test mode
exit to ONLINE
NV-RAM CLEAR SURE? (SET/ELSE) NV-RAM clear
exit to ONLINE
ROM/RAM WAIT SET CARD/CART SEL ROM/RAM wait setting
WAIT LEVEL=4* 0 to 15
exit to ONLINE
A-17