2. Hold down the following key combinations and turn the printer ON,
keep the button(s) pressed until the display changes.
FONT prog date........ Display PROGRAM DATE
press CONTINUE key
prog time........
font date..........
font time..........
version.......
EngVer LDA VX.X
FORM FEED LANG=ENGLISH* Switch LOCAL PROMPT
LANG.=FRANCAIS
SPRAC=DEUTSCH
TAAL=NEDERLAND
LENG.=ESPANOL
LING=ITALIANO
Ú
DRAM CHECK START Check DRAM
Press the Continue key to execute Test.
Then, press the Continue key to exit to ONLINE.
3. Go off-line and press the following keys simultaneously
MODE + FORM FEED + CONTINUE
LINE TEST LCD TEST All LCD segments turned ON
SWITCH TEST Press switches to check operation on LCD
SENSOR TEST Test all sensors
RAM SIZE Shows installed RAM size
TRAY 1 SETTING Shows current Tray 1 size
TRAY 2 SETTING Shows current Tray 2 size
PCMCIA 1 TEST Test PCMCIA slot 1 if card installed
PCMCIA 2 TEST Test PCMCIA slot 2 card if installed
MIO TEST Test MIO card if installed
exit to ONLINE
SINGLE TESTPRINT TEST PATTERN = NORMAL*
TEST PATTERN = GRID
TEST PATTERN = LINE
TEST PATTERN = BLACK
A-18
To Next Page
Loading...
