2-27
Confidential
Replace
Parts
Belt Unit
Belt unit is at the end of life. 5D,
5E
2-53
Drum Unit
Drum unit is at the end of life. 1E,
50
2-37
2-50
Fuser Unit
Fuser unit is at the end of life. 54 2-50
Laser Unit
Laser unit is at the end of life. 55 2-50
PF Kit MP
MP paper feeding kit is at the end of life. 51 2-50
PF Kit 1
Paper feeding kit1 is at the end of life. 52 2-50
PF Kit 2
Paper feeding kit2 is at the end of life. 53 2-50
Replace Toner
Each toner cartridge reached the end of
life.
60
61
62
63
2-55
The color toner reached the end of life
during printing.
74 2-59
Replace WT Box
Waste toner box full. (The sensor detected
that the waste toner became full.)
CF 2-91
Scan Unable XX
Some kind of scanning error. A5-
BF
2-79
2-86
Self-Diagnostic
Fuser unit error.
(After the error code 58 occurred, a failure
in the fuser unit is detected again upon
start-up.)
59 2-52
Short paper
It was detected that the length of the paper
under printing was less than the specified
value.
5B 2-53
Size Error DX
Unsupported paper size is used for duplex
printing.
89 2-69
Small paper
It was detected that the size of the paper
was less than the specified value.
5C 2-53
Storage Full
USB device overcurrent error. CA 2-89
Toner Error
Pressure engagement/disengagement
failure of toner cartridge.
C6 2-88
Too Many Files
There are too many files stored on the USB
flash memory drive.
--- 2-140
Tray 2 Error
Paper tray 2 pressing plate up/down error. C4 2-87
Unable to Update
Execution of the program update cannot be
started because other function is being
executed.
--- 2-140
Error message Description
Error
codes
Refer
to: