Confidential
vii
1.3.5 Printout of Test Pattern (Maintenance mode 09) ........................................ 5-14
1.3.6 Worker Switch Setting and Printout (Maintenance modes 10 and 11)........ 5-16
1.3.7 Operational Check of LCD (Maintenance mode 12) ...................................5-19
1.3.8 Operational Check of Keys on Control Panel (Maintenance mode 13)....... 5-21
1.3.9 EEPROM Dump and Log Information Saving (Maintenance mode 17)...... 5-22
1.3.10
Updating of Firmware Using an External Memory (Maintenance mode 28)
..... 5-23
1.3.11 Sensor Operational Check (Maintenance mode 32) ................................... 5-24
1.3.12 Printout of Dial Log (Maintenance mode 37)............................................... 5-26
1.3.13 Backup of Machine Information (Maintenance mode 46)............................ 5-27
1.3.14 Setting of Country/Language (Maintenance mode 52) ...............................5-29
1.3.15 Transfer of Received FAX Data and/or Equipment's Log (Maintenance
mode 53).....................................................................................................5-30
1.3.16 Fine Adjustment of Scanning Position (Maintenance mode 54) ................. 5-32
1.3.17 Acquisition of White/Black Level Data and CIS Scanner Area Setting
(Maintenance mode 55) .............................................................................. 5-34
1.3.18 Cartridge IC Communication Check (Maintenance mode 57)..................... 5-35
1.3.19 Updating of Paper Feeding Correction Values (Maintenance mode 58)..... 5-36
1.3.20
Checking of CIS Travel and Specifying of CIS Type (Maintenance mode 59)
.. 5-41
1.3.21 Printout of PRN/JPEG Files in Memory Card (Maintenance mode 61)....... 5-43
1.3.22 Move of the Head/Carriage Unit to the Adjustment Position (Maintenance
mode 63).....................................................................................................5-44
1.3.23 Adjustment of Software Correction for Inclination/Corrugation/Ruled Lines
(Maintenance mode 65) .............................................................................. 5-45
1.3.24 Adjustment of Margins in Borderless Printing (Maintenance mode 66) ...... 5-47
1.3.25 Updating of Head Property Data and Backup/Restoration of Head
Calibration Data (Maintenance mode 68) ................................................... 5-49
1.3.26 Traveling Speed Check of Head/Carriage Unit (Maintenance mode 69) .... 5-51
1.3.27 Customizing Destinations (Maintenance mode 74)..................................... 5-52
1.3.28 Move of the Head/Carriage Unit to the Flushing Position (Maintenance
mode 75).....................................................................................................5-55
1.3.29 Purge Operation (Maintenance mode 76)...................................................5-56
1.3.30 Print of the Maintenance Information (Maintenance mode 77) ................... 5-60
1.3.31 Adjustment of Touch Panel (Maintenance mode 78) .................................. 5-63
1.3.32 Display of the Equipment's Log (Maintenance mode 80)............................ 5-64
1.3.33 Equipment Error Code Indication (Maintenance mode 82) ......................... 5-67
1.3.34
Output of Transmission Log to the Telephone Line (Maintenance mode 87)
... 5-67
1.3.35 Assurance Mode Switch Setting (Maintenance mode 88) .......................... 5-68
To Next Page
Loading...
