Brother MFC-J2320

3-107
Confidential
9.48 Registration Sensor PCB ASSY
(1) Release the Hook on the Registration sensor holder and remove the Registration
sensor holder from the Frame base.
(2) Warp the Registration sensor inwards to release it from the guide, then slide off the
Registration sensor PCB ASSY in the direction of the arrow.
Fig. 3-123
Assembling Note: When attaching the Registration sensor PCB ASSY to the
Registration sensor holder, press the sensor section of the Registration sensor PCB
ASSY to assemble.
Frame base
Hook
Registration
sensor PCB ASSY
Registration
sensor holder