5-85
Confidential
2.4 Special Purge (SPP) < Ink tank model only >
< Function >
This purge function restores operation from a nondischarge state caused by a large
amount of air in the ink line. It can be initiated by the user by following instructions from
service personnel, for example as received over the phone.
< Operating Procedure >
(1) Press the Ink key while the printer is in the standby state.
(2) Choose Print Head Cleaning. The Black only/Color only/All selection screen
will be displayed.
(3) Hold down the X key for approx. 5 seconds. The SPP will be performed.
To Next Page
Loading...
Need help?
General
