2-33
Confidential
Supplies
Belt End Soon
Number of pages printed with the
belt unit will reach the upper limit
soon.
4300 2-48
Drum End Soon.
Number of the drum unit rotations
reaches the upper limit soon.
4000 2-47
Replace Belt
Number of pages printed with the
belt unit has reached the upper
limit.
4400 2-48
Replace Drum
Number of the drum unit rotations
has reached the upper limit.
4200 2-47
Toner Low
Dot counter of the toner cartridge
(Black) or develop roller counter
reaches the upper limit soon.
4B01 2-49
Dot counter of the toner cartridge
(Cyan) or develop roller counter
reaches the upper limit soon.
4B04 2-49
Dot counter of the toner cartridge
(Magenta) or develop roller
counter reaches the upper limit
soon.
4B03 2-49
Dot counter of the toner cartridge
(Yellow) or develop roller counter
reaches the upper limit soon.
4B02 2-49
WT Box End Soon
The waste toner sensor detected
that the waste toner box is almost
full.
4700 2-49
Toner Error
One or more Toner
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
The develop release sensor
detected the developer roller
disengagement or engagement
failure.
6E00 2-59
Touchscreen
initialization
failed
Remove any
material which is
on the
touchscreen.
Error occurred during touch panel
initialization.
D800 2-84
Tray 2 Error
Take out Tray 2 and
push it back in
firmly.
After the T2 paper tray unit is
opened and closed or the power
is turned ON, the T2 plate origin
sensor detects that lift-up of the
plate of the T2 paper tray unit is
not completed within the
specified period of time.
6C02 2-58
Unable to
Update
Check the
firmware update
file and try again.
Execution of the program update
cannot be started because other
function is being executed.
--- 4.14.3
Error Message
State
Error
Codes
Refer
to:
Upper line Middle line