BRP Evinrude E-TEC Series User Manual

15
INTRODUCTION
SYMBOLS
When “Ω” follows a value on the meter face, the
procedure is measuring resistance. Ω is the sym-
bol for ohm, the unit of measurement for resis-
tance.
Values
When “≤” precedes a value on the meter face, the
reading should be less than, or equal to, the value
shown.
When “≥” precedes a value on the meter face, the
reading should be greater than, or equal to, the
value shown.
DR4205
DR4206
DR4207

BRP Evinrude E-TEC Series Specifications

General

Brand	BRP
Model	Evinrude E-TEC Series
Category	Outboard Motor
Language	English