BRP Evinrude E-TEC Series User Manual

234
COOLING SYSTEM
PRESSURE RELIEF VALVE SERVICING
Remove the pressure valve components.
Inspection
Inspect all components for cracks, heat damage,
or signs of corrosion. Replace damaged compo-
nents. Clean all debris from pressure relief valve
components.
Assembly
Assembly is essentially the reverse of disassem-
bly. Pay close attention when performing the fol-
lowing additional tasks.
Torque cap screws to 60 to 84 in. lbs. (7 to 9.5
N·m).
005391

BRP Evinrude E-TEC Series Specifications

General

Brand	BRP
Model	Evinrude E-TEC Series
Category	Outboard Motor
Language	English