Need help?Do you have a question about the Buffalo BS-GS2016 and is the answer not in the manual?
Procedure to change the switch's IP address to match your PC's segment.
Procedure to access the switch's web admin interface.
Guide to changing the default admin credentials.
Confirm VLAN status and create new VLANs for network segmentation.
Configure SNMP community tables, host tables, and traps.
Configure filtering of MAC addresses registered manually.
Set MAC address learning limits for each port.
Configure the switch's username and password.
Displays the Power over Ethernet status for each port.
Configure Quality of Service priority settings.
Update the switch firmware from a local file.
Save and restore the switch's configuration settings.
Troubleshoot issues related to power, diag, and link/act LEDs.
Resolve problems preventing access to the switch's configuration interface.
Procedures for recovering or resetting forgotten credentials.
Save and restore the switch's configuration settings.
To Next Page
General
