Access Management
Configure each administration interface.
SNMP Enable or disable SNMP administration interface.
HTTPS
Enable or disable HTTPS administration interface.
Note: To use this functionality, upload SSL certificate on the [Basic] - [System
Security] - [Certificate] page.
Web Session Timeout Enter the timeout period for accessing Settings using HTTP.
Maximum Web Session
Number
Enter the number of users who can access Settings using HTTP at the same time.
Port Specify the port number for HTTPS connections.
HTTPS Session Timeout Enter the timeout period for accessing Settings using HTTPS.
Maximum HTTPS Session
Number
Enter the number of users who can access Settings using HTTPS at the same time.
Certificate
Upload or download the certificate. For HTTPS communication, prepare a certificate by yourself, or use the
certificate automatically created on the switch.
A certificate will be automatically created on the switch when no certificate is uploaded and the switch is rebooted.
The compatible certificate types are:
Certificate Type X.509
Private Key RSA up to 2048-bit (no encryption only)
Hash Algorithm SHA1, SHA256, SHA384, SHA512
The certificate must include the private key as the following:
-----BEGIN CERTIFICATE-----
…
…
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----
…
…
-----END RSA PRIVATE KEY-----
34
To Next Page
Loading...
