Buffalo BS-GS2016 - Port Settings; Ipv4;Mac Priority

Port Settings
Configure the ports to apply DiffServ policies. The ports specified by ACL rules cannot be specified.
Current Number of Active
Policies
Displays the number of active IPv4 and MAC address-based policies.
Current Number of Active
IPv6 Policies
Displays the number of active IPv6 address-based policies.
Port Settings Select a policy name and ports, then click [Apply].
IPv4/MAC (IPv6) ACL Rule
List
Displays the selected policy’s conditions.
IPv4/MAC Priority
Configure IPv4 and MAC address-based policies priority.
IPv4/MAC Policy List
Displays the list of IPv4 and MAC address-based policy. Policies are listed in order
of the priority.
Move Policy
Select a policy and enter the policy number that the selected policy moves to
before (or after). Select [Before] or [After] and click [Move] to change the priority
of the policy.
46
Chapter 2 Settings