Root Bridge Priority
(STP/RSTP only)
Select a root bridge priority of this switch.
Root MAC Address
(MSTP only)
Displays the root bridge’s MAC address.
CIST Root Bridge Priority
(MSTP only)
Displays the CIST root bridge’s bridge priority.
CIST Root MAC Address
(MSTP only)
Displays the CIST root bridge’s MAC address.
Regional Root Bridge
Priority
(MSTP only)
Displays the bridge priority of the root bridge in the MST region.
Regional Root MAC
Address
(MSTP only)
Displays the MAC address of the root bridge in the MST region.
Switch MAC Address Displays this switch’s MAC address.
Priority Displays the port priority.
Path Cost Displays the path cost.
Fastlink Displays if fastlink is enabled or disabled.
Status Displays the port status.
Role Displays the port role.
Ports
Configure STP settings for each port. Path cost can be switched between “Auto” and “Manual”.
Priority
Enter the port priority in hexadecimal format. This is used to decide the path to
the root bridge.
Path Cost
If path cost is set to “Manual”, you can edit the value. This is used to decide the
path to the root bridge.
58
To Next Page
Loading...
