SNMP Settings
SNMP Trap
Authentication Trap Disabled
Link Up/Down Disabled
STP Disabled
Loop Detection Disabled
Trunk Disabled
SNMPv3 User
Username admin
Access Control Read only
Authentication Method None
Authentication Key None
Encryption None
Encryption Key None
LLDP
LLDP Properties
TLV Advertised Interval 30 seconds
Hold Multiplier 4
Reinitializing Delay 2 seconds
Transmit Delay 2 seconds
Fast Start Duration 3 times
LLDP Port
Status Tx and Rx
Notification Disabled
Port Description TLV Disabled
System Name TLV Disabled
System Description TLV Disabled
System Capabilities TLV Disabled
Management Address TLV Disabled
LLDP-MED Port
Status Disabled
Notification Disabled
Capabilities TLV Disabled
Network Policy TLV Disabled
Extend Power TLV Disabled
Software Revision TLV Disabled
MAC Addresses
Static MAC
Filtering
Static MAC Filtering Disabled
Dynamic MAC
Filtering
Dynamic MAC Filtering Disabled
Number None
MAC Address
Aging
Aging Time 300 seconds
Port Settings
Speed/Mode
Settings
Name Port + port number
Admin Enabled
Mode Autonegotiation
Flow Control Disabled
IEEE 802.3az Enabled
APD Enabled
Jumbo Frame Enabled
83
Appendix A Specifications