CAB SQUIX - Advanced Troubleshooting for Print Issues

29
7 Test Functions
7.1 Overview
The Test menu contains test functions providing information on:
• themostimportantcongurationparameters
• the fonts available in the printer
• important hardware components and connected peripheral devices
• the print image quality and state of the thermal printhead
• available WLAN networks.
7.2 Status Print
The Status print
functionprintsatestimagecontaininginformationonthecongurationandstatusoftheprinter.The
printoutoccursusingtheheatlevelandprintspeedspeciedintheSetup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Test > Status print.
The printout can be canceled with
.
Status print
Thu Aug 11 08:38:42 2016
cab SQUIX 4/300MP
Firmware V5.00 (Jul 28, 2016) - #164162031171
Printing
Heat level 0
Print speed 75 mm/s
Print position X 0.0 mm
Print position Y 0.0 mm
Backfeed smart
Backfeed position 1.0 mm
Single print mode Off
Reprint Re-render
Labels
Label sensor Gap Sensor
Extrapolate labels Off
Ribbon
Transfer print On
Warn level ribbon 32 mm
Pause on warning Off
Tearing-off
Tear-off mode On
Tear-off position 0.0 mm
Cutting
Cut position 0.0 mm
Perforation level 0
Peeling-off
Peel-off position 0.0 mm
Backfeed delay 250 ms
Labelling
Transfer mode Stamp on
Cycle sequence Print-Apply
Waiting position up
Blow time 1000 ms
Roll-on time 1000 ms
Support delay on 0 ms
Support delay off 0 ms
Start delay 0 ms
Vacuum delay On
Vacuum control On
Peel-off position 0.0 mm
Interfaces
Ethernet
Hostname cab-999163
DHCP Off
IP address 192.168.9.13
Netmask 255.255.255.0
Gateway Off
WLAN
WLAN On
Access Point cabgast
DHCP Off
IP-Adresse 172.20.200.93
Netmask 255.255.255.0
Gateway Off
Network services
FTP On
LPD On
RawIP 9100
Website On
Web service On
SNMP On
SNMP community public
Zeroconf On
Time service NTP
Time server 0.0.0.0
RS-232
Baud rate 115200
Handshake RTS/CTS
Errors
Error-Reprint On
Syntax error On
Barcode error On
Network error On
Region
Language English
Country Germany
Keyboard Automatic
Time
Date 11.08.2016
Time 08:38:42
Time zone UTC+1 (Berlin,Paris)
Daylight saving EU
Display
Orientation 0°
Brightness 8
Time powersave 5 min
Interpreter
Character set UTF-8
USB JScript
RS-232 JScript
FTP JScript
LPD JScript
RawIP JScript
Bluetooth JScript
ZPL
Print width 100,0 mm
Label length 150,0 mm
Security
PIN protection On
Printer Info
Operative time
Total 247h 17min
Service 119h 22min
Number of labels
Total 2123
Service 930
Thermal transfer
Total 91.960 m
Service 62.822 m
Thermal direct
Total 4.267 m
Service 0.000 m
Cleaning interval 1000 m
TPH temperature 23.4 °C
Heat voltage 23.8 V
Figure 12 Status print
Parameters marked italic are only printed when the printer is equipped with the respective optional
assembly or when the service key is inserted