CAB SQUIX Configuration Manual

41
9 Extras
9.3 Load Settings
AprintercongurationpreviouslysavedtoastoragedevicecanbeloadedwiththeLoad settings function.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Load settings.
 Selectthedesiredle.
 Conrmtheselectionwith .Loadingofthecongurationdatastarts.DonotremovetheUSBashdrive
until the loading procedure is complete. The printer returns to the Extras menu.
If an error occurs during the loading procedure, an error message appears in the display. Restart the loading
procedureinthiscase.Ifanerroroccursagain,thecongurationparametersmustbeenteredviathecontrolpanel.
9.4 Reset Settings
With the Default settings function all setup parameters excepting the passwords  page 13 can be reset to the default
values.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Reset settings.
The display shows "Reset settings".
 Select Continue. The setup parameters will be reset and printer returns to the Extras menu.
9.5 Reset Passwords
The function Reset passwords allows to reset all passwords for the network services to the default values.
 Start menu.
 Select Extras.
IfthemenuisprotectedviaaPINapromptappearsinthedisplay.Enterthecodenumberandconrmit.
 Select Reset passwords.
The display shows "Reset passwords".
 Select Continue. The passwords will be reset and printer returns to the Extras menu.
Function User name Password
Web interface access admin admin
FTP printing ftpprint print
FTP access to storage devices ftpcard card
FTPrmwareupdate ftpadmin admin
Web service soap soap
Table 27 Default passwords

CAB SQUIX Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Max Print Speed	300 mm/s
Display	LCD
Interfaces	USB, Ethernet, Serial (RS232), USB Host
Memory	64 MB RAM
Media Sensors	Reflective, transmissive
Label Length	5 to 4000 mm
Keyboard	Optional
Supported Materials	Paper, plastic, textile