CAB SQUIX Configuration Manual

33
7 Test Functions
7.6 WiFi Status

Access only when WLAN is activated!
The WiFi status function prints out a list with the most important parameters of the accessible Wireless Access Points.
TheprintoutoccursusingtheheatlevelandprintspeedspeciedintheSetup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Test > WiFi status.
The printout can be canceled with
.
WiFi status
Thu Aug 11 10:15:20 2016
cab SQUIX 4/300
Firmware V5.00 (Jul 28, 2016) - #164162031171
Channel Name/BSS ID Signal level Security
1 default
●●●●●
WPA2-PSK
00:24:b2:36:98:60
1 cab-firma
●●●●●
WPA2-PSK
00:24:b2:36:98:61
1 cab-gast
●●●●●
WPA2-PSK
00:24:b2:36:98:62
11 default
●○○○○
WPA2-PSK
00:24:b2:36:98:60
11 cab-firma
●○○○○
WPA2-PSK
00:24:b2:36:98:61
11 cab-gast
○○○○○
WPA2-PSK
00:24:b2:36:98:62
Figure 16 WiFi status
The parameters have the following meaning :
Column Meaning
Channel Channel; frequency range of the Access Point
Name/BSS ID
Name of the wireless LAN
MAC address of the Access Points
Signal level Scale of the WiFi signal strength
Security Type of data encryption
Table 25 Parameters of the WiFi status

CAB SQUIX Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Max Print Speed	300 mm/s
Display	LCD
Interfaces	USB, Ethernet, Serial (RS232), USB Host
Memory	64 MB RAM
Media Sensors	Reflective, transmissive
Label Length	5 to 4000 mm
Keyboard	Optional
Supported Materials	Paper, plastic, textile