CAB SQUIX Configuration Manual

55
13 FTP Printer Management
13.4 FTP Firmware Update
FTPallowstocarryoutarmwareupdate:
 Establish a FTP connection with the user name ftpadminandthedenedpassword(Default:admin).
An empty folder of the FTP server will be shown.
 Copyavalidrmwarele(e.g.500_6714.cfw)tothefolder.
The status of the saving procedure is shown by a progress indicator in the display. The printer resets automati-
cally after the update is carried out successfully.
 Close the FTP connection.
Whetherthermwareupdatewascarriedoutsuccessfullycanbecheckedonthe"Status"tabofthewebinterface.

CAB SQUIX Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Max Print Speed	300 mm/s
Display	LCD
Interfaces	USB, Ethernet, Serial (RS232), USB Host
Memory	64 MB RAM
Media Sensors	Reflective, transmissive
Label Length	5 to 4000 mm
Keyboard	Optional
Supported Materials	Paper, plastic, textile