CAB SQUIX Configuration Manual

36 36
8 Diagnostic Functions
8.3 Event Log
The label printer saves the following events in the Event log:
• Hardware fault
• Printhead replacement
• Firmware updates
• Changing the OEM name
• Resetting of the service counters
TheprintoutoccursusingtheheatlevelandprintspeedspeciedintheSetup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Diagnostics > Event log.
Event log
Thu Aug 11 14:04:15 2016
cab SQUIX 4/300MP
Firmware V5.00 (Jul 28, 2016) - #164162031171
Date Description
30.06.16 07:45 TPH (#59-0051) -> 300 dpi, 1248 dots
30.06.16 07:46 Firmware update -> V5.00 (0000)
12.07.16 07:38 Firmware update -> V5.00 (0000)
13.07.16 13:35 Druckermodell: cab SQUIX 4/300MP
02.08.16 14:01 Firmware update -> V5.00 (0000)
05.08.16 11:38 Clear service counters
05.08.16 11:38 Cleaning interval -> 41242 + 1000000
Figure 19 Event log

CAB SQUIX Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Max Print Speed	300 mm/s
Display	LCD
Interfaces	USB, Ethernet, Serial (RS232), USB Host
Memory	64 MB RAM
Media Sensors	Reflective, transmissive
Label Length	5 to 4000 mm
Keyboard	Optional
Supported Materials	Paper, plastic, textile