To Next Page

To Previous Page

The cabFirmwareUpdater, which can be downloaded free of charge from the cab Website, offers an easy way to

transferrmwarelesfromthecomputertotheprinter.

Figure 34 cabFirmwareUpdater

With the cabFirmwareUpdater it is possible to start a

rmwareupdateviaUSB,Ethernetorserialinterface:

1. Start the cabFirmwareUpdater.

2. Select the printer model.

3. Select the interface (Port).

4. Choose "Firmware".

5. Locatethermwareleandselectit.

6. Click "Update".

Theselectedlewillbeuploadedtotheprinter.Thermwareupdatewillbestartedautomatically.

17 cabFirmwareUpdater

Other manuals for CAB SQUIX

Questions and Answers:

Need help?

Do you have a question about the CAB SQUIX and is the answer not in the manual?

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Max Print Speed	300 mm/s
Display	LCD
Interfaces	USB, Ethernet, Serial (RS232), USB Host
Memory	64 MB RAM
Media Sensors	Reflective, transmissive
Label Length	5 to 4000 mm
Keyboard	Optional
Supported Materials	Paper, plastic, textile