Section 6. Network Status and Resolving Communication Problems
6.1.2.7 Pool Devices
The Tools | Pool Devices menu item opens a new window that offers
information about each pool (root device) and each pooled device that has been
assigned to it. For example, given that a modem pool root device
(SerialPortPool or TerminalServerPool) for a particular station has three serial
ports assigned to it, the specific information for each of the serial port/modems,
based on when it has been used to call that station, can be viewed by selecting
the Modem Pool and in turn each Modem Pool Resource assigned to it. The
following information can be displayed:
• Error Rate – This represents the error rate specific to the selected
Modem Pool use of the selected pooled device.
• Skipped Count – The number of times this pooled device has been
skipped when using the selected Modem Pool.
• Available – Indicates if the selected resource is available or is in use.
The Graph can be used to view the history of attempts to use the selected
resource (pooled device) by the selected Modem Pool.
The Records tab is used to view events associated with the use of the pooled
resources.
6.1.2.8 State of Operations
The Tools | State of Operations menu item opens a window that provides for
monitoring of operations queued by the LoggerNet server for BMP1 and
BMP5 devices in the network map (i.e., CR10X-TD, CR23X-TD, CR510-TD,
CR10X-PB, CR510-PB, CR23X-PB, CR200X series, CR800 series, CR3000,
CR1000, RFBase-TD, and RFRemote-TD/PB).
6-10
To Next Page
Loading...
General