Section 4. Setting up Datalogger
Networks
The EZ and Standard Views of the Setup Screen provide ways to create and maintain the
communications link and data collection schedules for a network of dataloggers. The EZ
View uses the EZSetup Wizard which walks you through the setup step-by-step. In the
Standard View, you add devices and configure their settings on your own. Either method
will result in a network map with all of the devices and communications links to reach the
datalogger stations.
The Network Planner is a graphical application that assists the user in designing a PakBus
datalogger network.
The Device Configuration Utility, or DevConfig, is a stand-alone tool that can be used to
configure settings in the dataloggers themselves, as well as in communication devices such
as RF400 radios or NL100s.
4.1 Setup Screen – EZ View (EZSetup Wizard)
The EZ View of the Setup Screen uses the EZSetup Wizard. The wizard was
designed to walk you through the setup and configuration of your datalogger
network. As you work through the steps for the Wizard, each screen has fields
that are completed with the pertinent information about your station. In
addition to setting up a new station, the EZSetup Wizard can be used to edit an
existing station.
Open the wizard by pressing the Add button. The EZSetup Wizard starts with
the page shown below.
4-1
To Next Page
Loading...
General