Section 7. Creating and Editing Datalogger Programs
For example, the following expression could be used to create a new input
location for temperature in degrees Fahrenheit from an existing input location
for temperatures in degrees Celsius.
TempF=TempC*1.8+32
7.4.2 Creating a New Edlog Program
To create a new datalogger program, choose File | New from the Edlog menu
and select the datalogger type from the dialog box. A window similar to the
one shown below appears.
Select the datalogger you are using from the list and click OK. A blank
program template will come up as shown below for a CR10X.
7-53
To Next Page
Loading...
General