Section 7. Creating and Editing Datalogger Programs
The Source File is the CSI or DLD file to be converted. The Program File is
the new CR* file that will be created. By default, the resulting file name for
the CR1000, CR800, or CR3000 program that will be created is the name of
the original program with a CR* extension. This can be changed if desired by
typing in a new path and/or file name directly, or by pressing the Browse
button to the right of the Program File field.
When OK is chosen, the Edlog program file — or Source file — is opened up
in the left window of the Transformer. The CRBasic program file is created in
the right window.
7-78
To Next Page
Loading...