Section 8. Working with Data Files on the PC
8-92
C:\Campbellsci\CardConvert directory. You should rename this file as it will
be overwritten the next time that CardConvert is closed.
When running CardConvert from a command line, you can designate the CCF
file using the command line option runfile. For example,
“C:\Program Files\Campbellsci\CardConvert\CardConvert.exe”
runfile=“C:\Campbellsci\CardConvert\myfile.ccf”
The above command line will run CardConvert using the settings contained in
myfile.ccf.
If there are no problems or questions encountered, CardConvert will start,
convert the file(s), and then exit with no user interaction. However, if any
problems or questions are encountered, CardConvert will display a dialog box
as usual and then wait for a user response. Therefore, this command line option
allows some automation of CardConvert but does not allow for completely
unattended automation. To minimize the user interaction required, the
Destination File Option “Create New Filenames” should be used as this
prevents CardConvert from asking whether a file should be overwritten.
To Next Page
Loading...
General