EasyManua.ls Logo

Canon EOS 6D - Charging the Battery

Canon EOS 6D
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
1
Remove the protective cover.
Detach the protective cover provided
with the battery.
2
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
T
o detach the battery, follow the
above procedure in re
verse.
3
Recharge the battery.
For LC-E6
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E6E
Connect the power cord to the
charger and insert the plug into a
power outlet.
X Recharging starts automatically and
the charge lamp blinks in orange.
It takes approx. 2.5 hours to fully recharge a completely exhausted battery at room
temperature (23
°
C / 73
°
F). The time required to recharge the battery will vary greatly
depending on the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hours).
Charging the Battery
LC-E6
LC-E6E
Charge Level
Charge Lamp
Color Indicator
0 - 49%
Orange
Blinks once per second
50 - 74% Blinks twice per second
75% or higher Blinks three times per second
Fully charged Green Lights up

Table of Contents

Other manuals for Canon EOS 6D

Related product manuals