299
When you select images to use in photobooks (up to 998 images) and
use EOS Utility (provided software) to transfer them to a computer, the
selected images will be copied into a dedicated folder. This function is
useful for ordering photobooks online and for printing photobooks on a
printer.
1
Select [Photobook Set-up].
Under the [x1] tab, select
[Photobook Set-up], then press
<0>.
2
Select [Select images].
Select [Select images], then press
<0>.
X An image will be displayed.
If you press the <u> button and turn
the <6> dial counterclockwise, you
can select an image from a three-
image display. To return to the single-
image display, turn the <6> dial
clockwise.
3
Select the image to be specified.
Turn the <5> dial to select an
image, then press <0>.
Repeat this step to select other
images. The number of images which
have been specified will be displayed
on the screen’s upper left.
To cancel the specified image, press
<0> again.
To return to the menu, press the
<M> button.
p Specifying Images for a Photobook
Specify One Image at a Time
To Next Page
Loading...
