37
3 Setting the Date, Time, and Zone
4
Set the date and time.
Press the <U> key to select the
number.
Press <0> so <r> is displayed.
Pr
ess the <V> key to set the
number, then p
ress <0>. (Returns
to <s>.)
5
Set the Daylight Saving Time.
Set it if necessary.
Press the <U> key to select [Y].
Pr
ess <0> so <r> is displayed.
Pr
ess the <V> key to
select [Z],
then press <0>.
When the daylight saving time is set
to [Z], the time set in ste
p 4 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
6
Exit the setting.
Press the <U> key to select [OK],
then press <0>.
X The Date/Time/Zone and daylight
saving time will be set and the menu
will reappear.
The date/time that was set will start from when you press <0> in step 6.
After changing the time zone, check that the correct date/time has been
set.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the date/time/zone may be reset. If this happens, set
the time zone and date/time again.
To Next Page
Loading...
