83
In Basic Zone modes when the shooting
function settings screen is displayed, you
can press the <Q> button to display the
Quick Control screen. The table below
indicates the functions that can be set
with the Quick Control screen in each
Basic Zone mode.
1 Set the Mode Dial to a Basic Zone mode.
2Press the <Q> button. (7)
X The Quick Control screen will appear.
3Set the function.
Press the <V> key to select a function. (This step is not
necessary in the A mode.)
X The selected function and Feature guide (p.63) will appear.
Functions can also be selected with the <6> or <5> dial.
Settable Functions in Basic Zone Modes
o: Default setting k: User selectable : Not selectable
* If you change the shooting mode or set the power switch to <2>, it will revert
to the default settings (except the self-timer).
Q Quick Control
Function A C
8
2 3 4 5 6 F G
Drive mode
(p.98)
u: Single shooting
o o k o o k o o o
i: Continuous shooting
k k o k k o k k k
B: Silent single shooting
k k k k k k k k k
M: Silent continuous shooting
k k k k k k k k k
Self-timer (p.100)
Q
k k k k k k k k k
k
k k k k k k k k k
Ambience-based shots (p.84)
k k k k k k k
Light/scene-based shots (p.87)
k k k k
Blurring/sharpening the background (p.72)
k
Example: Portrait mode
To Next Page
Loading...
