338
With AC Adapter Kit ACK-E6 (sold separately), you can connect the
camera to a household power outlet and not worry about the remaining
battery level.
1
Connect the DC Coupler’s plug.
Connect the DC Coupler’s plug to the
AC Adapter’s socket.
2
Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the pow
er outlet.
3
Place the cord in the groove.
Insert the DC Coupler’s cord carefully
without damaging the cord.
4
Insert the DC Coupler.
Open the battery compartment cover
and open the DC Coupler cord hole
cover.
Inser
t the DC Coupler securely until it
locks and put the cord through the
hole.
Close the
cover
.
Using a Household Power Outlet
DC Coupler cord hole
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1>.
To Next Page
