Troubleshooting Guide
366
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem
slow or may look black. It will return to normal at room
temp
erature.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted
in the camera. If the Eye-Fi card has a write-protect switch set to
the LOCK position, you will not be able to check the card’s
connection status or disable Eye-Fi card transmission (p.339).
[33: Highlight alert] is set to [Enable] (p.240).
[33: AF point disp.] is set to [Enable] (p.240).
If t
he image is protected, it cannot be erased (p.265).
Movies edited with a computer using the provided ImageBrowser
EX (p.393) or other software cannot be played back with the
camera. However, video snapshot albums edited with EOS Video
Snapshot Task (p.232
) can be played on the camera.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
Playback Problems
Part of the image blinks in black.
A red box is displayed on the image.
The image cannot be erased.
The movie cannot be played back.
To Next Page
Loading...
