45
Basic Operation
Turn the dial while holding down
the lock release button at the
center of the dial.
(1)
After pressing a button, turn the
<6> dial.
When you press a button such as <f>
<R> <i>, the respective function
remains selected for the duration of the
timer (9). During this time, you can
turn the <6> dial to set the desired
setting.
When the function selection ends or if
you press the shutter button halfway, the
camera will be ready to shoot.
Use
this dial to select or set the AF
operation, drive mode, ISO speed,
metering mode, AF point selection,
etc.
(2)
Turn the <6> dial only.
While looking at the viewfinder or LCD
panel, turn the <6> dial to set the
desired setting.
Use th
is dial to set the shutter speed,
aperture, etc.
Mode Dial
6 Main Dial
The operations in (1) are also possible while the <R> switch is set to
the right (Multi function lock, p.47).
To Next Page
Loading...
