A Fully Automatic Shooting (Scene Intelligent Auto)
68
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred subject
due to camera shake. Using a tripod or a Canon EX-series Speedlite
(p.170) (sold separately) is recommended.
When the external flash was used, the bottom part of the
pictur
e came out unnaturally dark.
If a hood is attached to the lens, it can obstruct the flash coverage. If
the subject is close, detach the hood before takin
g the picture with
flash.
In Basic Zone modes except <G>, using a Canon EX-series Speedlite
(sold separately) in low-light or backlit conditions can capture the subject
brightly while avoiding camera shake or reduce backlit shadows.
To Next Page
Loading...
