Canon GP160DF - Page 222

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
11-16
5. Adjusting the output level
6. Adjusting the NL
No. Work details Illustration/ remarks
1 Press the Data Registration Key
→ # key. This displays the ser-
vice mode screen.
2 Using the shift keys ▲▼, select
#2 MENU, and press the SET
key. This will display the #2
MENU screen.
3 Using the shift keys ▲▼select
007, and press the SET key.
4 Use the shift keys ▲▼to
change the parameters, and
press the SET key.
# 2 MENU
007 15
No. Work details Illustration/ remarks
1 Press the Data Registration Key
→ # key. This displays the ser-
vice mode screen.
2 Using the shift keys ▲▼select
#2 MENU, and press the SET
key. This will display the #2
MENU screen.
3 Using the shift keys ▲▼select
005, and press the SET key.
4 Use the shift keys ▲▼to select
either OFF or ON, and press the
SET key.
# 2 MENU
005 OFF