COPYRIGHT
©
1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
13-95
CHAPTER 13 TROUBLESHOOTING
#1 SSSW-SW26: Transmission function settings
Table 13-517
[Bit 0]
Selects whether or not to set the forced direct transmission function.
Set: All transmissions other than broadcast transmissions are sent directly.
[Bit 6]
Selects whether or not to interrupt communications to all destinations when broadcast
transmission is interrupted.
[Bit 7]
Selects whether or not to output an error report when the stop key is pressed to inter-
rupt transmission.
SW
No.
Bit
No.
Function
26
0 Forced direct transmission function
Bit setting
10
Set Do not set
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6
Destination at the time broadcast transmission is
interrupted
One destination All destinations
7 Error report for time of transmission interruption Do not output Output
To Next Page
