Canon GP405 - Features

COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
1-1
CHAPTER 1 GENERAL DESCRIPITON
I. FEATURES
1. High-Speed, High-Image Quality
m Copy Speed:
405/400 40 ppm
335/330 33 ppm
m Resolution
Read in copier mode 600 x 600 dpi
Write in copier mode 1200-equivalent x 600 dpi
In fax mode 600 x 600 dpi (hyper GENESIS smoothing)
m Gradation 256
2. Large-Capacity Image Memory
m The machine comes with a 32-MB image memory as standard, which may be expanded up
to 96 MB.
m The use of an image memory has enabled making as many copies as needed with a single
scan of an original, significantly improving the efficiency of copying work.
3. New No-Stacking Duplexing Mechanism
m Double-sided copies may be made without holding paper in the duplexing assembly,
helping to improve the efficiency of copying work. The mechanism can turn out a large
number of double-sided copies while limiting damage to the paper to a minimum.
4. Large-Capacity Paper Source
Adding accessories, the machine can be turned into a paper source holding as many as 5550
sheets.
m 2 cassettes (front loading; standard) 500 x 2
m Multifeeder 50
m Cassette Pedestal-S1 500 x 2
m Paper Deck-B1 3500 (A4, B5)
5. Saddle Finisher w/ Book Binding Mode/Saddle Finisher (accessory)
m The saddle stitcher unit will prove its ability when producing booklets in book bind mode.
m The finishers unit is capable of stapling/sorting a total of 100 sets (193.6 mm high; 1300
A4 sheets of 80 g/m
2
).
m The finisher unit is capable of delivering as many as 50 sheets to the trays 1 through 3
(220.6 mm high; about 1500 sheets of 80 g/m
2
) and the interrupt tray.
m The finisher unit is equipped with a job offset function to facilitate sorting work.
m The buffer path function ensures that the host copier's productivity will not be affected by
the use of various finishing work.